HOTLINE
139-6103-8310In the cold and summer season, many agricultural machines in the countryside were left unused. For the coming spring consumption, storage and maintenance of these agricultural machines can not be underestimated. It teaches you some small skills.
1, iron proof parts rust. At present, most parts of agricultural machinery are made of iron. If they are not well preserved, they are easy to rust. Iron parts are once rusted and stripped to a skin, which will prolong their service life. As a result, iron parts should be removed in summer, clean and clean, coated with antirust paint, and stored in a ventilated and dry warehouse.
2, anti rotten wood manufacturing. Some agricultural parts is made of wood, with easy rotten. Therefore, you should wash, dry, apply tung oil, and then put it in a dry and dry place.
3, anti rubber parts aging. If the rubber parts of the agricultural machinery are damp or oil, it is easy to crack and prolong the service life. Therefore, the Deling machine, the ploughed parts, the triangle belt or the flat belt on the pump should be removed and hung on the wall in the dry and ventilated center. During the parking period of the moving machine, Jack or brick will be used to lift the front and rear axle of the locomotive, so that the tire will be released from the air, and no load will be accepted, but the appropriate air pressure should be kept.
4, the anti - electric motor is dampened. The motor used for agricultural machinery does not need to be long. It should be put in a dry, ventilated and clean storeroom. If the motor and the pesticide and fertilizer are put together, perhaps in the wet mud or easily wet places, the motor can be damp, the external insulation function drops, easy to form short circuit and ground, leakage, and even burn the coil.